1) Choose a Obitsu body in Natural or White skin color to match your Blythe. 23cm Obitsu body have a similar height to Blythe's original body.

幫B女選擇個合適膚色的身體. 選擇了23cm 的 Obitsu 硬胸身, 和原本的身高差不多

2) Unscrew the screws at the back of Blythe's head, Totally 3 screws.

把頭蓋後面的螺絲鬆開,一共3粒

3) Open Blythe's head carefully by a flat screwdriver.

 螺絲鬆開後,再借助平頭螺絲批小心打開頭蓋

4) Take out Blythe's original body from her head.

取出B女的身體

5) For the Obitsu body, Unscrew the screw located at the top of the neck attachment.

Change to the largest neck attachment and screw.

在Obitsu身體, 鬆開最頂的螺絲,換上最大那個上頸圈後, 再把螺絲上緊

6) Wrap some foam tape or elastic tape on the neck attachment.

在頸位加上厚膠紙或橡皮筋使其緊扣些

7) Place the Obitsu body onto Blythe's head.

放身體上B女頭蓋.

8) Close Blythe's head and screw tightly.

 把B女頭合上, 把螺絲上緊

9) Pull out Obitsu body's hands, belly and lower part.

把Obitsu身體的雙手,胸和腰拉開.

10) Put some foam inside the bust.

 放一些海綿進胸內.

11) And put some foam inside the wrist. Then re-assembly the body.

又放一些海綿進腰內. 再把身體合回.

12) Finished ! Blythe now has a new body.

完成了 ! B女已換上新的身體

13) Hello, I can make many pose now!

可以自由擺出多種姿態